The expanded version of the arrow airwaves, it has 2 independent white noise voices, tap tempo LFO to modulate the volume of the dry signal, the volume of the main white noise voice and/or the filter cutoff of the filtered white noise voice, plus 3 different trigger modes: Always on white noise, White noise is active when you aren't playing or White noise is active when you play.
If you are looking for an always on WNG, check the Arrow.
Top Row controls
Filter toggle: syncs the filter cutoff to the LFO, the amount is set by filter ii knob.
Dry Modulation: when the LFO is on, this knob sets the amount of volume modulation of the dry voice.
WNG Modulation: when the LFO is on, this knob sets the amount of volume modulation of the wng voice.
Trigger Toggle: Selects if the WNG is activated when there's signal at the input (stops when the signal ceases) or there will only be WNG when there's no signal at the input (Stops when the signal starts).
LFO type toggle: selects if the LFO is tap tempo (down) or the rate is set by the knob.
Filter ii knob: controls the frequency cutoff for the fitered wng voice.
Filter i knob: Amount of volume for the filtered wng voice.
wng: Amount of volume for the main wng voice.
FRQ: Fine tune for the wng.
MOD: Mix control of the main wng voice and the dry voice.
Gain: Gain control for the dry voice.
Vol: Amount of volume for the dry voice.
Trigger: Adjust the trigger sensibility.
Rate: Sets the rate of the lfo in manual mode or the tap ratio multiplier in tap mode.
Wave: Selects the waveshape of the lfo.
Silk Screened artwork with enamel ink into a powder coated aluminium case
Dimensions: 5.5" x 4 1/2" x 2 1/2"
Powered only by DC 9v power Jack (center negative), no batteries option
IN/Out/Power/EXP Jacks on top
Expression Jacks: External control of the mix knob and filter cutoff via a TRS expression pedal or 0-5v CV source, also compatible with the Bandwidth, broadband and broadcast.